您好,欢迎到访bingge的博客! 登录后台 查看权限

Merlin--HGG 380.65.5-Changelog

Merlin by HGG bingge 2017-03-24 1230 次浏览 个评论

********************************************************************************************************************************************

*   MANDATORY: FACTORY DEFAULT RESTORE (http://ROUTERIP/Advanced_SettingBackup_Content.asp) AND/OR HW RESET IS REQUIRED AFTER FW UPGRADE   *

*   ********   A REBOOT / POWER CYCLE IS ALSO RECOMMENDED IN ORDER TO LOAD DEFAULT CONFIGURATION.                                          *

*   DO NOT USE/IMPORT OLD CONFIGURATION FILE FROM A DIFFERENT FW AFTER FLASHING, JUST CONFIGURE IT MANUALLY FROM SCRATCH.                  *

*                                                                                                                                          *

*   ALL WIRELESS CHANNELS ARE UNLOCKED AND AVAILABLE ON THIS FW, SO YOUR CLIENTS COULD NOT USE SOME OF THEM BECAUSE OF REGION LOCK ON THE  *

*   CLIENT SIDE. DO NOT USE AUTO CONTROL CHANNEL OPTION OR THE ROUTER CAN ACT LIKE IT'S NOT BROADCASTING TO THOSE CLIENTS.                 *

*                                                                                                                                          *

*   ALWAYS CHOOSE A MANUAL CONTROL CHANNEL ON BOTH 2.4 AND 5GHZ BANDS (http://ROUTERIP/Advanced_Wireless_Content.asp)                      *

*                                                                                                                                          *

********************************************************************************************************************************************



POWER SLIDE: - http://ROUTERIP/Advanced_WAdvanced_Content.asp

===========


These are the new TX Power level reference values:



   1% => 30mW (13.2dBm + 1.5dBm[AG] = 14.7dBm)


  25% => 119mW (19.2dBm + 1.5dBm[AG] = 20.7dBm)


  50% => 251mW (22.5dBm + 1.5dBm[AG] = 24dBm)


  75% => 531mW (25.7dBm + 1.5dBm[AG] = 27.2dBm)


 100% => 1000mW (28.5dBm + 1.5dBm[AG] = 30dBm)



By default the FW powerslide is set to 50% (24dBm), for more information about txpower usage please read: 


http://quantenna.wpengine.com/wp-content/uploads/2016/08/80211nPowerSettings.pdf


NOTE: This FW will increase wireless signal strength RSSI by 10-24dbm over stock/other FWs on 2.4 and 5GHZ bands, depending on router model. 


ENHANCED MODE / MAXIMUM COVERAGE option (only available on FW versions >= 380.57) can be used to gain an extra ~7-12dBm (2.4GHZ) / ~3-5dBm (5GHZ).



IMPORTANT NOTE:

===============


Local regional laws regarding RF power transmission and channels use should ALWAYS be respected when using this software.


ASUS KNOWN ISSUES:

=================


Specifically on RT-AC87U model:


- Guest Networking

- Wireless information

- WPS



TODO LIST:

=========


- Iptables nDPI support.

- WEBUI wireless management restriction.

- WEBUI overclocking support.



CHANGES:

=======


380.66: (UNDER DEVELOPMENT)


- NEW: IPSEC support.



380.65.5:


- NEW: Minor backports from ASUS 9736 GPL code.

- FIXED: ASUS Network Map code.

- FIXED: RT-AC3200 stability issues.

- UPDATED: OpenVPN to 2.4.1 version.

- UPDATED: SFTP Server to 7.5 version.


更新支持机型:

RT-AC5300

RT-AC3200

RT-AC3100

RT-AC88U

RT-AC87U

RT-AC68U/RT-AC1900/RT-AC66U B1

RT-AC66U

RT-AC56U/RT-AC56S

RT-N66U

RT-N18U

RT-N16U


本文来自 AsusSmart Router Blog 转载请注明;

本文地址:http://www.asussmart.com/smart/475.html